Wireless Safety Alert & Driveway Patrol Alarm
This unique passive infrared system concentrates on the protected area you
select. Whenever the unit is set with the alarm in the on position, the motion
detector will monitor the protected area.
Once movement is detected the alarm will turn on. The Driveway Patrol Alarm
also has a chime mode to alert you as well. This alarm has many functions. It
can be used to let you know when a child is leaving the home. It can be used
to alert store owners when customers arrive. Keep an eye on almost anyone of
your assets. You can use multiple units in 1 location. Only 1 sensor can be
used per receiver.
Very Easy to Install, portable security wherever you need it; Home, Apartment,
Trailer, Boat, Storage, Motor Homes, Camping, Hotel, Attic, Driveway.
Motion activated up to a 30' foot range
Angle of view of 30 degrees
Advanced infrared motion detection technology
Requires one (1) 9-Volt and three (3) "C" batteries (not included,
Includes transmitter and receiver
NOTE: If the motion detector is too sensitive, resulting in false alerts - simply
put masking tape or labels on each side of sensor window. Start on the sides
and add an equal length of masking tape or labels to each side. Test the detector
and add more covering if needed. Keep the band as narrow as 1/8: wide or wider
dpending on individual situation. Some trial and error may be required to find
the optimal width.
NOTE: Whenever installing the PIR sensor for the first time, the red LED on
the PIR sensor may illuminate for about 60 seconds. To avoid receiving false
alert, the door chime should be turned on after the first 60 seconds of the
PIR sensor installation.
Including PIR Wireless sensor and receiver
Wireless RF Transmission up to 400 ft
PIR sensor detect motion and trigger receiver turn on alarm or chime
Sound Hi/Low switch
Alarm/Chime/Off Select Switch
PIR wireless sensor 9v battery (not included) operation
Receiver 3C size batteries (not include)
Compatible with DC adaptor (not included DC 6V 200mA, 120v 2 flat pin adaptor)
for receiver unit
Battery low indicator LED for transmitter and receiver
Trigger flash LED
No wiring, easy to install
Water resistant for PIR wireless sensor