UnderCover Qual-Tron Covert Surveillance System

Raptor Qual-Tron surveillance camera system

Package includes:

Qual-Tron Multi-Channel Data Receiver(MCDR-Package engine)

GSM/GPRS, CDMA or 802.11 b/WIFI wireless (select one of these above)

3.2mm bullet camera with armor cable

Rugged, weatherproof 9.25 x 7.75" outdoor enclosure

Military grade external connectors

MPEG4 DVR video recorder with 4GB SD card (expandable to 32GB)

External 12V charging port

Sensor options: Passive IR sensor (included in price) or you can swap for: Active IR break beam, Magnetic, Seismic or break wire sensor (select one above)

NOTE: If you need to add more/varied sensors than just one selection above, please view 'ACCESSORIES' section at bottom of this page

FEATURES

Emails JPEG photos when triggered by wireless sensors

Includes MPEG4 DVR video recorder

DVR Recording in D1 702 X 480 @ 30 FPS on SD Card

Long field battery life

Connect any standard 12V video camera

Built-in GPS receiver (Optional)

Cellular notification with 30 Seconds

Triggered by Qual-Tron, Inc. ground sensors

CDMA or GSM-GPRS cellular networks

Easy to conceal

The Raptor Qual-Tron surveillance camera system is a covert camera system that employs military grade components such as the ground perimiter sensors, connecters and modules. The unit is an upgrade from the Raptor system, with the addition of the Qual-Tron receiver module. This module makes it possible to use the Qual-Tron ground perimiter sensors.

When this unit senses motion, it will instantly send photos via a wireless cellular or WiFi network, giving ample time to apprehend an offender.

Added sensor options include:
Seismic, Magnetic, Break Wire, and Passive Infrared.

Deployment seniors allow for multiple sensor types to be deployed in perimeter protection.

OPTIONAL ITEMS:

Armor cable

Compatible Accessories:
Directional And Or Switch Sensor (Optional Item: Extra cost ) The Directional And Or Switch (DAOR) can be used with the MIDS-II and EMIDS Intrusion Detection Systems to provide directional information. The DAOR has two inputs for sensors and an output to a transmitter. When a target passes by both sensors, the direction is recorded by the DAOR and sent as a data message as part of the alarm. There are 16 modes of operation with various gate times.	Mini Break Beam Sensor (Optional Item: Extra cost ) The IR Break Beam Sensor (MBBD) is an active infrared system. It consists of two elements, an emitter and detector. The emitter transmits a pulsed infrared beam that is aligned with the detector head and is activated if an object interrupts the beam. This sensor is effective for both animate and inanimate objects.
Mini Break Wire Sensor (Optional Item: Extra cost ) The Break Wire Sensor (BWSH) is activated when the wire is broken. The Unattended Ground Sensor contains 250 meters of # 44 gauge parallel bonded wire which provides circuit continuity and incorporates a built in self test. This intruder sensor must be manually reset after each activation. This sensor is an excellent choice for monitoring doors, gates or objects that must be moved.	Mini Magnetic Sensor (Optional Item: Extra cost ) The Magnetic Sensor (MAGH) detects the passage of any magnetic object entering or leaving the magnetic field surrounding the sensor. This sensor is effective for detecting armed personnel and vehicles. There are three magnetic sensors with different sensitivity ratings and detection ranges (Normal, - 20 dB, - 40 dB).
Mini Passive IR (PIR) Sensor (Optional Item: Included) The Passive Infrared Sensor (PIRH) detects the passage of an object by the change in IR heat. The sensor has a built in alignment feature and an adjustable gain setting switch. Two versions are available (normal and Long Range).	Mini Seismic Sensor (Optional Item: Extra cost ) The Seismic Sensor (MSSH) detects the passage of people and vehicles from vibrations they cause in the ground. The vibrations are picked up by a geophone which activates an alarm. Ranges of the vibration sensor vary depending on ground and soil density. There are two versions of the Seismic Sensor (MSSH sensor only and MSID which includes the sensor and single channel transmitter).
QTI Bullet Camera with 3.2-12mm Zoom lens, 940nm IR (Optional Item: Extra cost) 3.2mm to 12mm variable zoom & focus lens with external adjustment controls 48-LED 940nM no glow IR Includes armor cable and QTI military type connector	940nM IR illuminator with 15 ft Y-Cable. 2M-2F QTI Armor (Optional Item: Extra cost) IR illuminator with 940nM no-glow LEDs Y-cable connector to connect camera in-line with the control box Includes armor cable and QTI military type connector
Analog video camera cable 3M-Fly leads 5ft with armor (Optional Item: Extra cost) Connect standard 12V analog cameras with BNC video and 2.1mm 12V DC power connectors Includes armor cable and QTI military connector

System Specs
Size: 9-1/4" tall X 7-3/4" wide X 4-1/2" deep
Weight: ~10 Pounds.
Power: 12V 3.4 AH SLA Rechargeable Battery or 8-D Cells (optional)
Wireless Radio: GSM/GPRS: 850/900/1800/1900 MHz, CDMA (Verizon Only), or WiFi
Capture Device: JPEG Still (640 X 480)
Video Recording: MPEG4 D1 704 X 480 @ 30FPS
Optional GPS: 50 Channel GPS Receiver
Cellular Antenna: External antenna with SMA connector
Battery: 12V 3.5 AH SLA Rechargeable battery and AC wall charger
External Charging Port: Externally charge with external 12V batteries
Camera: Most NTSC Video Cameras w/ BNC video output and 2.1mm 12V power input. (NTSC Bullet camera included)
Video Camera Cable: 15' Flying lead video cable with standard BNC/2.1mm video camera connections. (armor cable upon request)
Wireless Protocol: SMTP POP3 protocol or FTP protocol