The MagicMic voice recorder is unique from any of our other recorders
in the sense that it comes with a wireless microphone. This microphone
will allow you to record up to 300 feet away. Simply place the mic where
you think sound will be and it will transit wirelessly to the mic up to
300 feet away. But if you prefer just use the embedded microphone for
regular voice capture.
The other incredible feature is the 350 hours of standby time and 145
hours of battery life. need we say more? It's just one more quality product
found only at Safetybasement!
QUCK USER GUIDE:
Before you use your voice recorder, you should charge it for
several hours, at least 4 the first time or until battery level shows full. You
can do this by connecting it to your computer’s USB port, or connecting your
device to wall adapter.
Hint: Charge faster via wall adapter.
Battery Power will be on the voice recorder:
3 bars: Power is full
2 bars: Half power left
1 bar: Almost no Power
No bars: No Power
The icon of the battery will flash during the charging time
and it will stop when the recorder is fully charged.
CONNECTING TO PC:
You do not need to download any drivers to connect your
device to a PC or Mac. Simply connect the USB cable to your recorder. Connect
the other end directly to a USB port on your PC. Do not use a hub. In a few
moments, your PC will automatically connect to the voice recorder. The first
time, it may install standard drivers. This is normal. Your voice recorder will
charge while connected, and you can also access the files on it. You can now
use the voice recorder as you would any external drive or USB flash drive.
Remember to EJECT your device before pulling the USB cable out.
Push Down the power switch button. The screen
will turn on the device.
You can push the OK button for couple of seconds
to turn the device back on.
Push Up the power switch button to turn the
device off. The screen will turn black as soon as the recorder is off.
Please Note: If the unit is not in
use for two minutes, the recorder will turn off automatically.
From the main menu, press PREV or NEXT till you see the time
Press OK button to enter into Time mode.
Then press PREV OR NEXT to move around to individual parts
to set up Month, Date and Time.
Pressing VOL “-” or “-“will allow you to choose the right
After completing all the sections, press OK button to save
the data and return to Main menu.
This is a great feature to set up so the device does not
stay on and record white noise.
RECORD in VOICE ACTIVATED MODE: To set up voice activation
mode, you have to record once. After the first recording is done, use the
back/Forth Button on your device to choose the proper level of voice activation
recording from (0 to 10) 10 meaning getting the device really sensitive to very
little noise and start recording.
Press the Record Button to start another recording. If the
Voice Activated Recording worked, the VOS icon will flash and the time will
This voice recorder is amazingly easy to use. It allows you
to choose from different Recording Quality settings with the click of a button
(PREV or NEXT button from the main screen).
Once you choose which Record Setting you like, push the
RECORD button to enter into selected Recording:
Note: The higher the voice quality, the lower the stored
audio hours will be.
Description of the
RECORD SETTINGS Below:
This device allows you to adjust voice quality.
LP: long time Recording, Record Quality 32Kbps :
internal memory of this device can store 1110 hours.
Recording, Record Quality 128Kbps:
internal memory of this device can store 277 hours.
HP: High quality
Recording, Record Quality 192 Kbps:
internal memory of this device can store 185 hours.
Recording is one of the greatest features of this device. To set up this voice
Pull the antenna out from the wireless
Push down the power switch. Blue indicator light
will come on.
Make sure the wireless microphone is charged.
You can connect it to your PC with the provided USB cable. When the wireless
microphone is charging, a steady red light will come on. When it is fully
charged, the red light will disappear. You can use the wireless microphone for
Insert the provided earphones into the recorder,
press PREV or NEXT to choose the mode of wireless recording.
Some Tips for Optimum Wireless Recording:
Please keep the antenna of the wireless
The wireless microphone should be kept 1 to 5
meters away from the position of source of the sound.
Insert the earphones while you use the wireless
recording mode. This way you can listen in to LIVE RECORDING on the spot.
You can push the DEL button on the side of the
recorder for LOUD speaker if need be.
Once you decide which recording mode, push the RECORD button
to start recording.
To pause the recording, press the OK button. Pressing the OK
button second time will allow the recording to continue.
Press the RECORD Button to stop and save the recordings.
The recorded files will be saved automatically in the folder
which matches the selected mode such as HP, LP,etc
Once the recorder records 4 continuous hours, it will
automatically save the recordings and move to the next recording.
From the main menu, press PREV or NEXT till you see a Note symbol.
Press OK button to enter into Music mode.
FM RADIO: Frequency
From the main menu, press PREV or NEXT till you see FM.
Press OK button to enter into Radio mode.
Push the PREV or NEXT for manual scanning. When you come
across the channel you like to save, press the Record button.
If you press PREV or NEXT button for a longer time, the
device will perform automatic scanning and save the channels.
You can change channels by pressing the OK button.
TO delete the saved channels, Press the DEL button on the
side of the recorder. This will delete the current channel you are listening.
Note: It is recommended that you use the earphones to listen
to the FM Radio.
Pressing the DEL button for a long tie will turn on the
RECORDINGS VIA COMPUTER:
Your voice recordings are located inside folders divided by
RECORDING Mode such as LP, SP, etc. Double click the required folder to view
your voice recordings.
You should COPY these files to your PC for archiving and
To create more storage space, you can delete the files from
NOTE TO MAC USERS!
When deleting files, you MUST empty your trash BEFORE you Eject
the device from your Mac.