This is a professional high quality voice recorder only available at
safetybasement.com. It comes with incredible recording quality and battery life at almost 20 hrs.
And for when you don't need to gather any evidence or record that lecture
or meeting, use it as a regular smooth writing pen.
This unit is for the professional user looking for a device that does
not skimp on quality.
The microphone in this recorder is HD quality that filters out background
noise and focuses and enhances human voice. You will be amazed what this
little recorder can do!
It can also be used as a mobile storage unit for all your digital files.
CHARGING: First make sure power switch is in OFF position then connect device to power adapter or computer usb port to charge. The indicator light will blink during the charging process. The light will be steady once charging is complete.
POWER ON/OFF - Move power switch to ON (unit will immediately start recording). OFF to stop recording
START RECORDING: As stated above when you move switch to ON position unit will start recording. The indicator light will turn red and blink 3 times and stop. Unit will then be in recording mode
(Please note: Headphones must be unplugged for the unit to record)
VOICE ACTIVATED RECORDING: You can turn on the voice activated feature as follows: Move power switch to ON position then press - buton unitl red indicator light goes off. This will enable voice activated recording. At this point unit will only record if there is surrounding noise/sound. Note: Voice activated recording must be enabled each time unit is turned off then back on again. Otherwise unit will record in continuous mode the next time it is turned on.
HOW TO SAVE (STOP)RECORDINGS: while in recording mode, move switch to OFF position. The indicator light will turn red and blink once before going off. This will automatically stops and saves your file.
(Note: Headphones must be plugged in for the playback feature to work)
- Once headphones are plugged in, push power to ON position. This should enter your device to PLAY MODE and should begin playing your files.NOTE: Depending on whther you have MP3 files on the device or not, you may need to press the PLAY button to switch folders to get to your voice recordings.
VIA COMPUTER: You can simplify the playback by plugging device to your computer and playing back files that way. This is much faster and easier to manipulate files.
SKIP(NEXT) FILE : While a file is being played, you can skip to the end by pressing and releasing the + button
SKIP(PREVIOUS) FILE : While a file is being played, you can skip backwards to prvious file by pressing and releasing the - button
VOLUME UP/DOWN: while a file is playing
press and hold the + or - button to increase or decrease volume respectively.
DELETE FILE (via device): While a file is being played, press and hold the + and _ buttons together to enter delete mode. The indiator light at this moment will turn purple.
DELEE SINGLE FILE: While in delete mode, press = or - to delete current single file
DELETE ALL FILES: While in delete mode, press and hold both + and - buttons to delete ALL FILES (Please use this feature carefully!. We also recommend that you use your computer for this feature!)
CHARGING WHILE RECORDING: This unit can charge while recording, for infinite battery life while unit is plugged in. First move power switch to ON position then connect USB cable to device. Then press + and - buttons together and hold down until the indicator light goes off. Your device will now start recording while plugged in.
FACTORY RESET: Move power switch to OFF position, then connect the device to a PC. Right click device and select to format device. This should restore device to factory settings.