Omni Spectral Correlator
When protecting sensitive information is critical to your success, the OSCOR
provides the most automatic, reliable and cost effective capability on the market.
OSCOR is a complete eavesdropping detection package that is portable and programmable.
OSCOR is a microprocessor controlled countersurveillance system with a custom
designed built-in spectrum analyzer that can operate automatically storing all
encountered signals in memory for later review. Designed to detect all major
types of audio and video RF transmitters, including carrier current and infrared.
OSCOR is the only product that protects your environment 24 hours a day.
Automatic Threat Correlation. The patented OSCOR correlator provides signal classification
by correlating the demodulated audio of a received signal to the ambient noises
of an environment.
Automatic Signal Scanning and Logging. Only the OSCOR provides an automatic
solution to rapidly logging and classifying all the signals of your environment.
A quick reference guide provides a single chart that completely defines the
Sonic ranging and triangulation to pinpoint bug locations. Using the Patented
Threat Locating System, a bugging device can be readily found with no destructive
searches. The Triangulate and Locate option uses sonic ranging to locate a threatening
The OSCOR provides detailed signal analysis capabilities with a complete built-in
suite of audio demodulators and IF bandwidth selections. The audio demodulators
include FM wideband, FM narrowband, AM wideband, AM narrowband, Sub-carrier,
Single Sideband, and IF bandwidths 250 kHz, 15 kHz, and 6 kHz.
Built-in video monitors display images received on transmitted signals for
protection against covert video transmitters. Supported video formats include
NTSC, PAL, and SECAM. This feature is not included in the basic unit.
Built-in automatically switched antenna array. Foldout antenna panel automatically
selects the proper antenna with no connections required. Pre-amp provides maximum
sensitivity for the proper input. No un-reliable cable connections or mismatched
Built-in printer for hard-copy printouts. The OSCOR built-in thermal printer
provides a user with the ability to generate printouts of important sweep data.
Removable Program chip for ease of upgrading software.
PC Interface and Remote Control of the OSCOR. The OSCOR PC interface software
provides the capability to create permanent database profiles of sweep environments,
generate professional reports and graphs.
RF Receiver Type: Quad Conversion Super Heterodyne with 3 phase locked loop
RF Frequency Coverage: 10kHz-3GHz
Tuning Resolution: 100Hz
Sensitivity: 0.8�V typical with 15kHz Bandwidth (+15dBm MAX)
Demodulators: AM, FM Wide, FM Narrow. FM SC, SSB/CW
IF Bandwidth: 250kHz, 15kHz, 6kHz
Attenuators: 0, -20dB at active whip, Discone, and VLF-MF input
Dynamic Range: 90dB
Subcarrier Tuning Range: 15kHz-250kHz
Antenna Types: Balanced Loop 10kHz-500kHz (35-45kHz Narrow)
Active Whip: 500kHz-1500MHz
Infrared Detector: 10kHz-5MHz, 850-1070nM
AC Carrier Current: 10kHz-5MHz (Balanced Across Power Line)
8/16 Bit Microcontroller
128 (512K Optional) Static RAM Memory
Optical Encoder: 128 Pulse/Rev with variable count ratio
Program Key: 64K Byte ROM
Display: 128 x 256 Segment Graphics Supertwist LCD
Printer: 192 Dot Per Line Graphics on 2
Frequency Response: 50Hz-15kHz
Voiceband Filter: 300Hz-3000Hz -18dB/Octave
AGC Dynamic Range: 60dB
Output Power: 3W @ 4
Headphone Output: 0-2V rms @ 220
Record Output: 50mV rms (with AGC) @ 500
Remote contact: Normally Open (200mA 32V MAX)
Balanced Auxiliary Input: 0.5V rms Nominal @ 600
Reference Audio Input: 1mV - 1V rms @ 3.9K
Sonic Correlator: 50Hz - 15kHz (Frequency Independent)
Audio Alarm: 3 Level Programmable Two Tone Ringer
Squelch: Automatic digital or manual control over full display range
Headphones: Low acoustic leakage, output limited to 105dBA
AC Input: 105-130/210-260VAC, 50-60Hz, 24W
External DC Input: 12-l8VDC, 1A max
Internal Battery: 12.6V, 2.9 Ah 3 hour operation per charge typical
OTL-5000 OSCOR Triangulate and Locate
OVM-5000 OSCOR Video Option (Multiple formats): Allows the OSCOR to provide
viewing of video signals. Used for detection of covert surveillance cameras.
Supports NTSC, PAL and SECAM. Includes a video demodulator circuit board that
must be installed in the OSCOR main unit and two video monitors that fit inside
OSCOR storage Compartment. Includes OVP-5000.
OVP-5000 OSCOR Video Patch Cord: Patch cord that allows received video
signals to be fed directly into an alternate video monitor or a video recorder.
Video output is provided in a standard RCA plug.
OAR-5000 OSCOR Audio Recorder and Cables: Audio micro-cassette recorder
that connects directly into the connector tray to use the OSCOR audio recorder
OEM-5000 OSCOR Extra Memory (512K): Increases the OSCOR signal storage
capability from 7,168 signals to 28,672.
LPE-5000 Locator Probe Extension Cable: BNC cable that is identical to
the locator probe cable. Comes with barrel connector and provides extension
for the Locator Probe.
MIC-5000 Miniature Microphone: Used with the standard OSCOR cables to
provide a remote microphone input.
MPC-5000 OSCOR Multiple Purpose Cable: 12� Cable with 3.5mm male
and 3.5mm female connectors. Used to extend Loop Antenna range, OSCOR Telephone
Coupler and options MIC-5000.
MPA-700 Modular Phone Adapter: Provides easy access to telephone conductors
for testing. Universal connector works for 2,4,6 & 8 conductor telephone
CLA-700 Cigarette Lighter Adapter: Provides DC input to power the OSCOR
from an automobile cigarette lighter.
6 1/2? x 18 1/2? x 14 1/2?