Ground Hog video surveillance system
Undercover
The UndercoverEye™ Surveillance Camera System is an unattended video surveillance
system specifically designed for unattended covert outdoor surveillance of targets
ranging from, but not limited to marijuana fields, drug/meth labs, metal theft
including copper theft, anhydrous ammonia theft, illegal dumping, graffiti,
vandalism, construction site theft, sting operations, illegal ATV riders, and
monitoring remote locations.
Remote criminal activity and thefts are among the hardest types of crimes to
solve. Due to the random nature and the timing needed to get law enforcement
agencies on site to witness the crime it makes it almost impossible to catch
criminals in action. The UndercoverEye™ was specifically designed for this
purpose.
The small-sized recording box contains a Mini DVR recording full motion video
to a SD card which can be buried into the ground for ultimate covert surveillance.
An internal 12V Li-Ion battery powers the system for weeks or months of unattended
use, depending on the number of activations and trigger mode. A camera is tethered
to the recording box which allows connection of standard 12V cameras.
The UndercoverEye MDVR system is triggered by any of the wireless sensors.
Sensors ranging from PIR motion sensor, pressure plate sensor, vibrations sensor,
magnetic contact sensor, and normally open/closed switch contact sensor. There
is no limit to the number or types of wireless sensors that can be used in deployment
of the system.
The UndercoverEye™ system utilizes advanced battery savings sleep mode.
When system is triggered by a wireless sensor the system automatically switches
from sleep mode to active mode. This mode will enable the system to be deployed
for long periods of time.
This system is very simple to use and fast to deploy. A single person can deploy
UndercoverEye™ giving audible feedback from sensors triggers during setup.
The user can adjust how the UndercoverEye™ system will operate by easy
to use DIP Switches along with graphical instructions. Dual trigger modes allow
the system to use any of the wireless sensor products or to be triggered by
camera pixels motion detection.
Wireless sensors: (optional)
The UndercoverEye now can be connected to wireless sensors (see below). These
do not come with unit. Must be purchased separately
System Options:
Base System Includes (P/N)
UCI001
|
UndercoverEye™ water proof system case/motion control electronic
Removable RF Antenna w/ SMA connector
Bullet Video Camera
20' Flying lead video cable with standard BNC/2.1mm video camera connections.
(substitutes available upon request)
Removable sound MIC/cable
(1) Wireless PIR motion sensors
12V 4.5AH Li-Ion rechargeable battery
12V battery charging unit
4GB Media Card (expandable up to 32GB)
DVR Remote Control
PixController UndercoverEye™ CD with manuals and media player
Available Options:
-Base Unit - (P/N) UCI001
-Base Unit with Armor - UCI001A
-Base Unit with NIGHTVISION - UCI-110
-Base Unit with NIGHTVISION & ARMOR- UCI-110
PLEASE NOTE: Below picture is
for the armor upgrade option. standard unit is BLACK.
If you need the armor
version please select in options above.

|
Small covert & easy
to conceal for outdoor or indoor applications
|
|
Only
6 3/8” X 4 3/4” in size
|
|
Integrated DVR records
up to 16 hours
|
|
DVR Recording in D1 702
X 480 @ 30 FPS on SD Card
|
|
Connect any standard
12V video camera
|
|
Dual trigger modes:
wireless sensor or pixel motion detection
|
|
Rechargeable 12V Li-Ion
battery
|
|
Includes wireless PIR
motion sensor
|
|
External charging port
for long field deployment
|
|
Easy to conceal &
Easy to use
|
Your UndercoverEye™ system contains the following items:
• UndercoverEye HDD™ (UCI001) water proof system case/motion control
electronic (Wt: 10.7 lbs)
• Removable RF Antenna w/ SMA connector
• External bullet camera and microphone with weatherproof connectors (ONE
camera per system)
• 20' Flying lead video cable with standard BNC/2.1mm video camera connections.
(
substitutes available upon request)
• Removable sound MIC w/ 3' cable (variable cable
lengths available upon request
)
• (1) Wireless PIR motion sensors
• 12V 4.5AH Li-Ion rechargeable battery
• 12V battery charging unit
• 4GB Media Card
• Wireless SlimFire Key fob Remote for manual triggering systeml
• PixController UndercoverEye™ CD with manuals and media player
PLUS System Includes (P/N)
UCI001
|
(all items in base unit plus the following)
• FlashTrax XT Personal Video Player with built in
80Gb
Hard Disk
• Two (2) additional Long-range wireless PIR motion sensors
• One (1) additional 4GB Ultra II compact flash card
* FlashTrax to UndercoverEye custom video cable
|
Armor Option
Includes Optional ~10’ armored video cable for extra durability
|
NEW! PLUS unit now with 80GB HDD
Due to the nature of this product it can only be sold to Law Enforcement, Government
(State & Local), and Military.
Once you place your order, please fax your request on official department letterhead
to:
Addo Enterprises.
Attention: (Your order number). FAX Number: 888-236-2524
Need Manual? Call us for a copy
System Specifications
Case size: 6-3/8” L, 4 3/4” W, 2-1/8” D
Antenna: RF Tilt-Swivel Removable Antenna with SMA connector (315 MHz)
RF Wireless Range: 50-100 feet depending on obstructions and terrain
Battery: 12V 4.5 AH Li-Ion Rechargeable (AC Battery Charger Included). Extended
field time with the use of solar panels or external battery packs.
External Charging Port: Externally charge with external 12V batteries and/or
solar
panels
, or AC wall charger.
Sensors (RF Trigger Devices): PixController Wireless Sensor Product Line
PIR Wireless Motion Sensor Detection Area: 5° Sensing Area at 40-100 Feet
Detection
(depending on air temperature and target temperature)
System weight: 5.3 pounds (does not include weight of external components)
Recoding Devices Supported: MiniDVR (Digital Video Recorder) - MPEG4 video format.
Supports SD Memory cards up to 16Gb
Custom options available to support external devices, video cameras,
and other items you may want to interface. Please contact us for more information.
External Connections:
* Video Camera Input w/ 12V power
* Removable Sound MIC Input
* 12V Outputs – Connecting IR Arrays (optional)
* 12V Input – Solar Panel, External Battery, AC Charger (optional)
* Trigger Input - Remote Cellular Notification (optional)
Battery: 12V 3.4 AH SLA Rechargeable (AC Battery Charger Included). Extended
field time with the use of solar panels or external battery packs.
Sensors (RF Trigger Devices): Wireless PIR Motion Sensor and Wireless Manual
Keyfab
PIR Wireless Motion Sensor Detection Area: 5° Sensing Area at 40-100 Feet
Detection
(depending on air temperature and target temperature)
System weight: 5.3 pounds (does not include weight of external components)
Recoding Devices Supported: MiniDVR (Digital Video Recorder) - MPEG4 video format.
(Optional Sensors that can be used with this
unit)
Introduction
The Wireless
Sensor are a set of sensors which send a wireless “trigger” command to
a PixController wireless camera system. These includes, but are not limited
to, the UndercoverEye™ Product line, Raptor Camera Wireless Sensor Version,
DigitalEye™ RF, DVREye™ RF, Remote VideoEye™, and Sony LANC RF Systems.
There are many advantages in using a remote sensor triggered camera system.
Not only do they allow the camera systems to be placed in more covert settings
they allow the user to use an array of different sensors. See the chart
below for the sensor type and application it can be used for. Multiple sensor
can be used in a single setup, and several PixController wireless cameras
can be used in a single setup. Please see the example setups below.
Note: Any of the PixController legacy products using the old wireless
PIR motion sensor (
PixController wireless camera products purchased before
10/2011
) can be updated to use the new wireless sensor product line.
Download the procedure:
click here
Sensor
Type
|
Sensor
Function
|

PIR Motion Sensor
|
Passive infrared
detection (PIR) - body heat and motion will trigger the sensor. Typically
used to detect humans or vehicles. Detection based on target heat
moving over background heat. The cooler the background heat is and
the hotter the target heat is the longer the detection distance will
be. Detection distance out to 80'. Transmission distance up to 100'.
Operates on 3 AAA batteries lasting 1 year under normal use
|

NO/NC
Switch Sensor
|
Wireless switch
sensor. Used with normally open or normally closed contact sensors.
Includes 16' cable mounting to transmission tube. Transmission tube
includes 3 AAA batteries lasting 1 year under normal use. Transmission
distance up to 100'.
|

Magnetic Switch Sensor
|
Wireless
magnetic contact switch sensor for door/windows. The most basic sensor
of any alarm system is a door and window magnetic contact switch.
This type of contact switch is for normally closed circuits; this
means that the when the magnets are lined up, the switch is closed.
¾" Operation gap triggers sensor.
Includes 16' cable mounting
to transmission tube. Transmission tube includes 3 AAA batteries lasting
1 year under normal use. Transmission distance up to 100'.
|

Pressure Pad Sensor
|
Wireless pressure
pad sensor. Sensor activated with 65lbs of force or more. Sealed pressure
pad for outdoor and indoor use. Includes 16' cable mounting to transmission
tube. Transmission tube includes 3 AAA batteries lasting 1 year under
normal use. Transmission distance up to 100'.
|

Vibration Sensor
|
The wireless vibration
sensor will trigger the wireless camera system in the event when the
sensor is shocked, vibrated, or moved. Includes 16' cable mounting
to transmission tube. Transmission tube includes 3 AAA batteries lasting
1 year under normal use. Transmission distance up to 100'.
|
|
|