Lightning Lifts™

Lightning Lifts™ are clear, pre-cut latent print lifters. The lifter is held by a black tab at the top and the protective cover is peeled off and discarded. Then, you place the adhesive side on the latent prints, rub it down and lift it. Place the lift tape on the appropriate size and color of backing card.

Advantages of using Lightning Lifts™:

• The tab keeps fingerprints off the lift.
• The writing on the tab ensures you are viewing the print from the correct side.
• The tab is a convenient "handle" to pull up the lifter.
• Make a habit of placing the lift so that the tab is "up" in relation to the print.
• Four convenient sizes: 2"×2", 2"×4", 4"×4" and 6"×15".

2"×2" Lightning Lifts™ are also available with a package of a hundred 3"×5" white backing cards.