USING YOUR WATCH:

1. To turn on watch click the ON/OFF button for about 2-3 seconds until the indicator light turns on. It will blink for a few seconds then settle on a steady blue which means the unit is now ready for operation.

VIDEO:
- To start video quickly press the same ON/OFF button and releasse. The light will blink briefly and go off. This means unit is now recording and you can proceed to record video. To stop recording video just press the same button for a few seconds until the red light blinks breifly and goes off. You can now plug the unit to your computer to playback recordings or to record again follow the instructions by turning unit on then record again.

PICTURE:
Taking picture is just as easy. Turn unit on as above. Then to take one photo quickly press the CAMERA button. This will take one picture. Repeat as needed.

SETTING TIME:
To set time simply download the writeTime.EXE file here or get it on the included CD: See below:

writeTime.EXE (right click the link and select SAVE LINK AS. Then select the place you want to save this file. We recommend save it directly to the folder section on your watch. So before saving this plug your watch in then open the folder section where you will see the DCIM folder. Save this file right in that same area.)

After you have copied or saved the above folder to the root folder on the watch, double click the file then a little window will pop up. There will be two button options to press. Simply press the one on the LEFT. That should update your watches digital clock.

Now unplug the watch from the computer and turn it on. Your time is now updated to the time on your computer! Bravo!


following file (Click here). Then save this file in the root folder (same section as DCIM folder on the watch drive.