Countermeasure Probe Monitor
The CPM-700 is a broadband receiver designed to detect and locate all major types
of electronic surveillance devices including room, phone, body bugs, video transmitters,
and tape recorders.
Broadband receivers such as the CPM-700 provide a very important cost-effective
tool for professional sweep teams, government security personnel, and private
citizens with important security needs. The CPM-700 is very effective for rapidly
detecting and locating transmitted signals, while being very easy to learn to
use. The CPM-700 sweep kit includes a custom Cordura case that contains all
items necessary to conduct a professional sweep.
CPM-700 Advantages
Portable Sweep Kit - provides everything needed to perform a professional sweep;
fits inside a standard briefcase.
Multi-Functional Utility - Comes with probes to detect RF transmitters (audio
and video), carrier current transmitters, and telephone bugs. Probes also available
to detect for infrared transmitters, tape recorders, and acoustic leakage.
Wideband Coverage - from 200Hz to over 3GHz with no holes or gaps.
Monitor Mode - after a sweep, the alarm monitor (silent or audible alert) guards
against new devices brought in or remote control activation of surveillance
devices.
Auxiliary Audio Input - allows user to listen to telephones or lines for "hotmikes,"
hookswitch by-pass and "infinity" bugs. Unknown wires and cables can
be tested for wired microphones.
Specifications
R.F. Probe:
Gain: 20dB nominal Frequency
Response: 50kHz-2GHz ±3dB 3GHz-10dB
Sensitivity: -62dBm (1 segment) -85dBm M.D.L.
VLF Probe:
Frequency Response: 15kHz-1MHz-3dB
MAX input voltage: 300 VAC 50-60Hz
Isolation: 1500 VAC 60Hz
Sensitivity: -38dBm (1 segment) -60 M.D.L.
Audio Amplifier:
Input Impedance: 50K Ohm balanced
Input Range: 1.7uV-10V (135dB) AGC
Dynamic Range: 100dB (high and low gain)
Frequency Response:100Hz- 15kHz±3dB (filtered) 500Hz-24dB/octave, 2.5kHz-18dB/octave
Headphone Output: 5Vp-p 220
Record Out: 25 mVp-p nominal with AGC
Display:
LCD bargraph: 18 segment with pulsing single segment trip point
50dB dynamic range (1 segment High Gain to MAX Low Gain)
Alert Output: 2.8kHz tone or silent red LED at 2Hz
Remote Output: N.O. contact (300mA 25V MAX)
Battery:
8 ea. MN1500 AA Alkaline - Life 10-16 hrs
(Optional) 8 ea. 550mAh NiCad - life 3-5 hrs per charge
Low Battery Indicator: approx. 10% remaining power
AC adpter/Charger:
Input: 95-l30VAC 50-60Hz, or 200-275VAC 50-60Hz
Output: 12VDC with 500mA NiCad Recharge Time: 8-10 hrs
CPM-700 Unit:
Size: 9 1/8 x 6 1/8 x 1 3/4 in, 23.2 x 15.6 x 4.4 cm
Weight: 39 oz, 1.1 kg
Carry Case with all standard Items:
Size: 16 3/8 x 11 1/4 x 3 in, 41.6 x 28.6 x 7.6cm
Weight: 7 lbs, 3.18 kg
For manual click
here
Upgrades and Accesories for the Countersurveillance Probe/Monitor
IRP-700 - CPM Infrared Probe
MLP-700 - CPM Magnetic Leakage Probe
ALP-700 - CPM Acoustic Leakage Probe
MPA-700 - Modular Phone Adaptor
TRP-700 - Tape Recorder Patch Cable
CLA-700 - Cigarette Lighter Adaptor
NCB-700 - CPM Ni-Cad Battery Pack
BMP-1200 - CPM Broadband Microwave Probe
|
