Class 3 Orange Solid 2" Lime Reflective Vest
SKU: V-5A

Pro-Line Safety Products ANSI apparel are all made of tested and certified materials which meet or exceed current specifications set forth by the ANSI / ISEA 107-2004 Standard. The American Standard for High Visibility Safety Apparel is published and distributed to all areas of federal, state and local governments as a guideline for high visibility safety apparel. ANSI / ISEA 107-2004 has been updated from the original standard set back in 1999 and will be reviewed and evaluated every five years. The standard represents what the industry views as necessary to adequately protect workers from the hazards associated with working conditions in low visibility environments.

* High visibility orange or lime
* 100% solid or mesh polyester
* 2” and wide reflective available
* Black, orange, and lime cloth binding
* Velcro or zipper front closure
* Available in sizes: M - 6XL
* 3M™ Scotchlite™ reflective material

ANSI / ISEA 107-2004 REQUIREMENTS

Pro-Line Safety Products ANSI apparel are all made of tested and certified materials which meet or exceed current specifications set forth by the ANSI / ISEA 107-2004 Standard. The American Standard for High Visibility Safety Apparel is published and distributed to all areas of federal, state and local governments as a guideline for high visibility safety apparel. ANSI / ISEA 107-2004 has been updated from the original standard set back in 1999 and will be reviewed and evaluated every five years. The standard represents what the industry views as necessary to adequately protect workers from the hazards associated with working conditions in low visibility environments.

ANSI/ISEA 107-2004 Standard Specifications
American National Standard for High-Visibility Safety Apparel ANSI/ISEA 107-2004.

The American National Standards Institute (ANSI) approved a revised edition of the standard, ANSI/ISEA 107-2004. This is the culmination of several years of work by the ISEA High Visibility Products Group, in cooperation with employers and workers, test labs and material suppliers, safety professionals, and federal, state and local authorities.

This standard provides a uniform, authoritative guide for the design, performance specifications, and use of high-visibility and reflective apparel including vests, jackets, bib/jumpsuit coveralls, trousers and harnesses. Garments that meet this standard can be worn 24 hours a day to provide users with a high level of conspicuity through the use of combined fluorescent and retroreflective materials.

Class III
Class III garments provide the highest level of visibility to workers in high-risk environments that involve high task loads, a wide range of weather conditions and traffic exceeding 50 mph. Class III garments, provide coverage to the arms and/or legs as well as the torso, and can include pants, jackets, coveralls or rain wear. The standard recommends these garments for all roadway construction personnel and vehicle operators, utility workers, survey crews, emergency responders, railway workers and accident site investigators.

Class II
Class II garments are for users who need greater visibility in poor weather conditions and whose activities occur near roadways where traffic speeds exceed 25 mph. This class of garment is suitable for railway workers, school crossing guards, parking and toll gate personnel, airport ground crews and law enforcement personnel directing traffic.

Class I
These garments are intended for workers who have ample separation from vehicular traffic that does not exceed 25 mph. Class I garments are often safety vests thay are recommended for parking service attendants, workers in warehouses with equipment traffic, shopping cart retrievers, sidewalk maintenance workers and delivery vehicle drivers.