AutoLock® -26 w/ Power Safety Tip™, SuperGrip™ and Black Chrome Finish

General Description: Three stage steel baton with hardened shafts, a reinforced textured hard rubber Power Safety Tip™ with a SuperGrip™ handle.The baton with ball bearing action. Three stage baton has a recessed push button in the end cap enabling you to close the baton without having to bend over. A lubricated cam and ball bearing action provide the mechanism for locking and unlocking.

Recommended Holder: Textured: 3034 [for low carry: 3056]
Basketweave: 3634 [for low carry: 3656]
Shaft Locking Mechanism: Cam and Ball Bearing locking action provides the revolutionary mechanism for locking the shafts in place.
Shaft Unlocking Mechanism: Recessed Push Button in end cap shifts a push rod, which activates cam surfaces allowing the ball bearings to unlock.
Shaft Material: Hardened, aircraft quality 4130 seamless alloy steel tubing.
Hardness: Striking surface hardened and then tempered to 48 - 54 Rockwell C Scale to relieve brittleness.
Tensile Strength: 240,000 - 290,000 PSI (Pounds per Square Inch)
Diameter: 1.0625 inches (2.70 cm)
Closed Length: 11.50 inches (29.21 cm)
Expanded Length: 26 inches (66.04 cm)
Weight: 24 ounces (.68 kg)
Handle Grip: SuperGrip™ 1.032-inch (2.62 cm) diameter; tear strength minimum 108 pounds (48.99 kg) per linear inch, installed over knurled handle surface to eliminate slippage.
Handle Tubing: 0.875 inch (2.22 cm) outside diameter 0.083 inch (0.21 cm) wall thickness
Handle Finish: Nickel Finish
Middle Shaft Tubing: 0.635 inch (1.61 cm) outside diameter 0.065 inch (.017 cm) wall thickness
Middle Shaft Length: 8.71 inches (22.12 cm)
Middle Shaft Finish: Black Chrome
Small Shaft Tubing: 0.445 inch (1.13 cm) outside diameter 0.092 inch (0.23 cm) wall thickness
Small Shaft Length: 8.190 inches (20.80 cm)
Small Shaft Finish: Black Chrome
End Cap Construction: Machined steel end cap with a spring-loaded button coupled to a push rod with cam surfaces. 1.062" (2.70 cm) diameter x 0.625" (1.59 cm) long
End Cap Coating: Black Chrome Plating
Tip Construction: ower Safety Tip™ Larger reinforced textured hard, weighted, rubber tip: 0.625" (1.59 cm) diameter x 2" (5.08 cm) long; 3 ounces (.09 kg)
Quality Control Program:
In-process inspection at every operation plus 100% inspect and testing prior to shipment. In-process inspection consistent with US Department of Defense Mil-Std-105E and United Kingdom Defense Ministry Specification DEF-131-A. All 4130 Steel Tubing has Mill Certification including the chemical analysis of the steel. CAD Drawings and Exploded Views are available upon request.
US Patents: 6,231,447; 6,238,292 and 6,350,200 B2
Monadnock® reserves the right to make changes at any time in specifications, models or design without notice.