Auto Detect Wireless IP Camera
This item discontinued!
Now you can easily set up a camera that you can view from anywhere in the world
on the internet. The IC202W is the worlds first true plug and play MPEG4 IP camera.
There are tons of wireless IP cameras on the market today, what makes this one
different is that it auto configures the cameras IP address for the user, making
technical support a thing of the past! The Remote View software, which is included,
can monitor and record up to 16 cameras located in different locations, for example:
one in your home, one in your office, one in your vacation home, and the best
feature is they can all be viewed on one PC. This unit just gets better each time!
Our wireless IP Camera is a stand-alone device which allows you to view and
record live, full motion video, from anywhere in the world.
Specifications:
• No need for DDNS setting or IP mapping
• Easy access to the camera via the internet
• software will manage up to 16 cameras
• Built in web server
• Resolution VGA 640 x 480
• Email notification for motion detection
• Watchdog function
• 1/5 inch CMOS 1.0 lux
• 3.2 mm lens, 63 degree viewing angle, fixed iris
• MPEG4 video compression and streaming
• 30fps in all resolutions
• Up to 4 users in Unicast
• Unlimited users in Multicast
• Alarm and event management
The IC202/w IP Camera provides both wireless IEEE 802.11 B/G and wired Ethernet
network interfaces for flexible installation. It supports the WEP and WPA (Wi-Fi
Protected Access) security modes to provide the best security for wireless networks.
The wired network interface is the standard RJ45 Ethernet 10BaseT/100 BaseTX.
The wireless modes supported are infrastructure and ad-hoc. The included antenna
gain is 1.8 dBi. The IC-202W supports the following protocols: web management
Userid and Password Protection and video display ID/ Password Protection in
all modes. Wireless mode supports WiFi, WEP, and WPA security mode. The hardware
requirements are a Pentium 4 Cpu, 1.0 GHz or higher or AMD equivalent running
Microsoft Windows XP SP2 or above and Framework 2.0, 256 MB RAM, and 35 MB of
hard drive space, CDROM and 1 free port on your router. The viewing angle for
the lens is 63 degrees with a light sensitivity is 1 lux. The camera is powered
by the included DC 5v 1A power supply. It measures in at 4.92 inches x 2.95
inches x 1.38 inches excluding the bracket. The camera weighs 0.6 pounds (including
the bracket but not the adapter). The IC-202W includes camera, adaptor, id/password
card, antenna, 5 feet of RJ45 cable, bracket, quick installation guide, manual
and CD.
Includes:
• IP camera
• AC adapter
• Camera mounting bracket
• Ethernet cable
• ID / Password card
• Installation CD (full user’s manual on CD)
• Quick start guide
SIZE:
4 3/4" x 3" x 1 1/2"
|
