AURA Ductless Fume Enclosure
 This
Ductless Fume Enclosure provides safe working conditions when latent print
powders are being used and chemical latent print development is done.
There is no need for building renovation. Just set it up, plug it in,
insert the filters and use it. This unit incorporates a HEPA (High Efficiency
Particulate Air) filter rated at 99.99% minimum efficiency for 0.3 microns
or larger, or an activiated Carbon filter for solvent usage, or a combination
of both filters for both uses. The air flow is adjustable by a solid state
speed control. This unit meets and exceeds OSHA and ANSI Z9.5 standards.
The AURA Ductless Fume Enclosure consists of a head section with an Advanced
Monitoring System, a variable speed blower and fluorescent lighting. There
are chemically-resistant acrylic panels and a deep spill tray. Use two
Hydrocarbon filters and two Hydrocarbon Safety filters if you are using
liquid chemicals in the enclosure. If you are using only latent print
powders, you need two HEPA filters and one HEPA Safety filter. If you
are going to use a mixture of powders and liquid chemicals, you need two
Hydrocarbon filters to screen the fumes from the liquids and one HEPA
Safety filter to screen the powders. It is recommended that the pre-filter
be changed about every 3-6 months, depending on your usage. With the Hydrocarbon
filter, safely use solvents, such as Glacial Acetic Acid, Acetonitrile,
Ethyl Alcohol, Methylene Chloride, Petroleum Ether, Acetone, Cyclohexane,
2-Propanol, Ethyl Acetate and Xylene among others.
The Advanced Monitor is a microprocessor-based monitoring system that
senses both hydrocarbon-output and air-velocity levels. A numeric keypad
on the head section allows data input of filter type and maximum time
allowance for filter use. Audible and visual alarms alert the operator
when the filters are blocked, incorectly inserted or need to be replaced.
The unit is portable and can be moved from room to room. The Spill Tray
can be removed and the AURA Ductless Fume Enclosure can be placed over
a counter sink or other work area as needed.
Specifications:
- Dimensions: 42" w x 28" d x 48" h
- Weight without filters: 166 pounds
- Construction: Aluminum Head Section and Frame coated with Polyurethane
Paint.
- Fiberglass Spill Tray
- Adjustable Air Flow
- UL Approved Brushless and Sparkless Centrifugal Motor Blower
- Average Face Velocity: 125 lfpm
- Average Face Velocity with Lower Sash Open: 85 lfpm
- Internal pre-filter change
- 2-year Manufacturer's Warranty
- Made in the USA
Advanced Monitor Specifications:
- Senses hydrocarbon and air velocity levels
- Digital display of airflow levels
- Displays filter type and tracks the amount of time in use
- A sensor adjusts the blower speeds based on the sash height
- Audible and visual alarm of low airflow and hydrocarbon breakthrough
- Filter saturation alarms to correspond to the solvents used and their
exposure limit levels
Solvents only: order two Hydrocarbon filters and two Hydrocarbon Safety
filters Powders only: order two HEPA filters and one HEPA Safety filter
Solvents and Powders: order two Hydrocarbon and one HEPA Safety filter
|
Code |
Name |
Price |
|
1-4801 |
Replacement Particulate Pre-Filters (pack of 6) |
$199.00 |
|
1-4850 |
AURA Ductless Fume Enclosure |
11,999.00 |
|
1-4851 |
Hydrocarbon Filter |
$549.00 |
|
1-4852 |
HEPA Filter |
$889.00 |
|
1-4853 |
Hydrocarbon Safety Filter |
$359.00 |
|
1-4854 |
HEPA Safety Filter |
$779.00 |
|
