VOICE ACTIVATED USB FLASHDRIVE/VOICE RECORDER
Finally a simple VOICE ACTIVATED audio recorder that you can actually believe
in! The 'Bentley' of Flash drive recorders. This unit is exclusive at Safetybasement.
We have remastered the 'insides' of this unit to give you the best recording
experience. We also removed all tell tale lights to ensure total privacy. No
lights when turned on and no lights when recording!
It comes with one of the industry leading super sensitive microphones. This
unit underwent rigorous test to ensure it will clearly capture voice at over
20 feet away. To ensure the voice activation captures EVERY conversation, our
engineers lowered the decibel level from 65DB (that is usually the lowest in
other units out there) and were able to bring it down to 45db! this way this
unit will capture a near whisper conversation!
The last, but certainly not least is the longer battery life that we were able
to pack into this tiny unit: almost 14 hrs of non stop recording on a
single charge compared to just 4 hrs in the D1400 or other similar looking
recorders out there! Don't be fooled by similar looking imitations. Kick their
tires and check under their hood and compare to this unit!!
Besides being a compact voice recorder, this unit also works as a regular flash
drive for your digital files.It is an all in one audio recording solution that
offers ease of use in a compact design. Operation is simple, with only one switch
to power the unit on and off. There is no software or cables needed for operation
of this device. Our USB digital voice recorder is portable and easy to use at
a great price.
The 4GB internal memory will give you tens of hours of high quality recording!
| HOT FEATURES |
WHAT'S UNDER THE HOOD (Features) |
1. On-push recording
2. Micro size
3. Super crisp audio capture
4. Ultra easy retrieval of recordings
5. No tell tale lights
6. Over 20ft clear audio capture |
VOICE ACTIVATED recording
14 hrs recording on a single charge
4 GB internal memory for 35 hrs recording
45 db voice detection level
384 Kbps recording quality (best!)
NO BLINKING LIGHTS |
| IDEAL FOR |
|
- Journalists
- Students
- Various investigative needs (such as issues with child at school,domestic
issues, etc) |
|

Operation
To maximize battery capacity, fully charge the battery before first use for
1.5 hrs. To start recording, slide the switch down and the red light will illuminate
for a few seconds and turn off. Even though the light is off the unit continues
recording. To power off the unit, just slide the switch back up. Connect it
just like you would any other flash drive to retrieve the data.
Specifications:
Memory :4GB
Battery : Built-in 100 mAH Li-battery
PC-interface : USB 2.0
Recording Format : WAV
Recording time : 12 hours continuous recording. Longer with voice activated
recording
Recommended maximum recording distance :15m
Recording spend: 384 kb/s
Charging time 2.0 hours
System required : win-ME,win-2000,win-XP or above
Audio output : Play through computer
Dimensions: 65 x 21 x 9mm
Includes:
USB flash drive / voice recorder
Instructions
SIZE:
2 1/2" x 3/4" x 1/4"
Using the Voice-Activated Recorder:
1. This unit is automatically defaulted to voice operated recording. To begin,
push the switch down to power on. The unit will begin to record. There are no
indicator lights to tell you it has started recording. This is a totally
NO-LIGHTS
unit. Just for your peace of mind, before deploying this unit test drive it on
yourself. Then plug in and play file(s)
2. To power off, push the switch UP (see diagram above). This will save file and
power off.
3. After switching off your VOICE ACTIVATED USB recorder, connect it to your computer
using a USB connector (see diagram below)
4. Once you have the files up on your computer screen, you can listen to, Delete
or Tranfer files as needed.

RECHARGING UNIT:
1. While charging the unit, the GREEN LED light will be on. Charging usually takes
about 1.5 hours
2. The fully charged battery should be able to support 14 hours of continuous
recording
3. The 4GB flash memory will be able to store about 35 hours of recording
4. Should the battery run out while recording, the recorded file will be automatically
saved before the unit automatically powers off
5. To charge the unit just plug it into the USB port of a (turned on) computer
HOW TO DELETE FILES
* Just right click the audio file and select DELETE.
Using the Voice-Activated Recorder:
1. This unit is automatically defaulted to voice operated recording. To begin,
push the switch down to power on. The unit will begin to record. There are no
indicator lights to tell you it has started recording. This is a totally
NO-LIGHTS
unit. Just for your peace of mind, before deploying this unit test drive it on
yourself. Then plug in and play file(s)
2. To power off, push the switch UP (see diagram above). This will save file and
power off.
3. After switching off your VOICE ACTIVATED USB recorder, connect it to your computer
using a USB connector (see diagram below)
4. Once you have the files up on your computer screen, you can listen to, Delete
or Tranfer files as needed.

RECHARGING UNIT:
1. While charging the unit, the GREEN LED light will be on. Charging usually takes
about 1.5 hours
2. The fully charged battery should be able to support 14 hours of continuous
recording
3. The 4GB flash memory will be able to store about 35 hours of recording
4. Should the battery run out while recording, the recorded file will be automatically
saved before the unit automatically powers off
5. To charge the unit just plug it into the USB port of a (turned on) computer
HOW TO DELETE FILES
* Just right click the audio file and select DELETE.